A faulty irrigation system can lead to excessive water consumption and reduced watering efficiency. A leak, whether visible or underground, must be detected quickly to avoid wastage and damage to the system. A number of tests can help identify the source of the problem and intervene before the situation worsens. <\/p>\n\n
Before carrying out technical tests, it’s important to spot the signs of a leak with the naked eye. Abnormally damp areas of the ground, persistent puddles or a drop in pressure in the irrigation network can indicate a leak. Soil settling or plants receiving more water than expected are also indications of a problem in the circuit. <\/p>\n\n
A simple method of confirming the presence of a leak is to read the water meter before and after a period when watering is stopped. If consumption continues to rise without use, a leak is likely. Some modern meters are equipped with a leak indicator that can be used to detect abnormal flows. <\/p>\n\n
Careful inspection of pipes, fittings and nozzles can often identify leaks. The junctions between different parts of the system are particularly sensitive areas. Low pressure in certain irrigation zones can also indicate a loss of water upstream. <\/p>\n\n
If the leak is difficult to locate, a pressure test can help pinpoint the source of the problem. By progressively closing off certain sections of the network and monitoring the pressure, it is possible to determine which part of the circuit has an anomaly. A pressure gauge can be used to measure whether the pressure drops abnormally when a section is isolated. <\/p>\n\n
In cases where the leak is underground, more advanced techniques may be required. An acoustic amplifier can be used to listen for the sound of leaks underground. An inspection with a tracer gas injected into the pipes is also an effective solution for pinpointing invisible losses. <\/p>\n\n
If your irrigation system has a hard-to-locate leak, Leader Services has the tools and expertise to detect it quickly and without destruction.<\/p>\n\n
A leaking irrigation system leads to excessive consumption and loss of watering efficiency. A visual inspection, pressure test and water meter check can often identify the leak. For more complex problems, advanced detection tools guarantee precise location and targeted repair. <\/p>\n","protected":false},"excerpt":{"rendered":"
A faulty irrigation system can lead to excessive water consumption and reduced watering efficiency. A leak, whether visible or underground, must be detected quickly to avoid wastage and damage to the system. A number of tests can help identify the source of the problem and intervene before the situation worsens. Watch for visible signs of … <\/p>\n